Description:

• Electric bike conversion kit equipped with a 500W Brushless Motor and 10AH Lithium Downtube Battery that reaches speeds up to 45km per hour and the range is up to 50km per charge by pedal assist.
• Our electric bike conversion kit and electric bicycle kit contains thumb throttle and 8 magnets Pedal Assistant System. They are very helpful, even if on the steep hills place. You can ride it very comfortable.
• Suitable for disc brake and V brake to use.
• Rear fork width requirement:135-142mm.
• Waterproof wiring connection system.

KT brand controller benefits :

• Use Imitate Torque Control Mode To Help Achieve A Smooth Start-Up Of The Vehicle, The Power-Assist Drive Will Be Smooth And Natural.
• Electric Power Assist Is With Fast Response And Always Consistent With The Riders Pedal Action To Achieve The Effect Of The Torque Boost.
• With Multiple Protection Features Such As Stalled, Over-Current, Over-Temperature, Over-Voltage, Under-Voltage, Speed, Lack Of Phase And So On To Protect The Safety Of Vehicle Electronic Control Systems And Traffic.

KT LCD5 Display functions:

• switching on and off the bicycle lights
• battery level indicator (4 bars)
• 3 speed display modes (current, maximum, average)
• traction help up to 6km / h
• odometer
• trip duration display

Specification:

• Full 48V 500W 10Ah 27.5" rear hub electric bike conversion kit
• Motor: 48V 500W brushless gear hub motor
• Battery: 48V10AH downtube lithium battery
• Charger: 110V-240V Input, Australian Safety standard
• Rim: Rear 27.5" aluminium double wall, 12g steel spokes
• Mode: Pedal assist or thumb throttle
• Display: KT LCD5, DIY setting
• Brake: WUXING e-brake levers with cut off
• Controller: KT brand 48V Controller. Maximum current rate: 22±1A
• PAS Sensor: 8 magnets
• Charging time: 4-6 hours
• Range: Up to 40km by pedal assist mode, Up to 30km by throttle mode
• Speed Up to 45km/h, top speed varies based on bicycle weight and configuration.

Package includes :

• 1 x 27.5" Rear Rim (48V 500W motor)
• 1 x Battery & Charger (48V 10Ah Lithium Battery )
• 1 x Controller
  
• 1 x LCD Display
• 1 x Pair of Power Cut-off Brake Levers
• 1 x Thumb Throttle
• 1 x Set Pedal assist sensor
• 1 x Wiring Cables
• 1 x Controller bag
• 1 x Installation Manual

Note:

• 48V 500W is not road legal power, please be advised that in some jurisdictions or state it is for riding on private properties only! Please make sure you check with your local authority before purchase. We recommend for off road use only!
• Professional installation recommend
• Basic tool will be required when install this kit
• If your bike has hydraulic mechanical brake, you need to buy a brake cut off sensor separately
• Please noted that the hub will only suit screw on freewheel (normally up to 7 gears)